Introduction
18 STEPS – A simple practice for the feature of a chamfer.
Feature
Boss Extrude / Cut Revolve / Revolve / Cut-Loft
Step 1 Front Plane
sketch as provided picture
Step 2 Boss Extrude
60mm
Step 3 Create a new Axis
Top and Right plane
Step 4 Right Plane
sketch as provided picture
Step 5 Cut Revolve
use the asix form step3
Step 6 Right Plane
sketch as provided picture
Step 7 Revolve
use the axis form step3
Step 8 Create a new plane
offset 30mm from the pink plane
Step 9 New Plane
sketch as provided picture
Step 10
Sketch from previse pink plane – sketch as provided picture
Step 11 Cut-Loft
Step 12 Circular Pattern
360deg； the number of instance：4
Step 13 Right Plane
sketch as provided picture
Step 14 Cut Revolve
use the axis from step3
Step 15 Fillet
4mm
Step 16 Boss extrude
Φ18.5mm； Thickness: 2mm
Step 17 Fillet
0.5mm
Step 18 Chamfer
1mm
Congratulations, you just finished this 3D modeling tutorial !